Product Details:
Grade | Standardised |
Elbow Bend Angle | Standardised |
Brand | Standardised |
Thread Size | Standardised |
Working Temperature | Standardised |
Inconel Pipe Nipple is a short pipe with threads on both ends, and it is commonly used to provide extension to various pipe fittings. These products have been stringently checked on various required parameters to ensure that they are with compliance to the industry standard. They find application in shower rise extension, connection of two FPT and other various piping systems. And we also offer these products at affordable prices.
Inconel Pipe Nipple Grades
Inconel Pipe Nipple Form
Pipe Nipple, Hex Nipple, Swage Nipple, Barrel Nipple
Type
Product Details:
Material | standardised |
Material Grade | standardised |
Grade | standardised |
Size | standardised |
Product Type | standardised |
Diameter | standardised |
Finishing | standardised |
We are counted amongst the leading companies involved in offering a wide assortment of Monel Round Bars. Our products are manufactured using fine quality material and advanced technology from the vendors end. Offered products widely used in engineering, construction, automobile and various other industries and have fine finishing.
Features:
Product Details:
Grade | standardised |
Material | standardised |
Material Grade | standardised |
Size | standardised |
Standard | standardised |
Color | standardised |
Density | standardised |
Diameter | standardised |
Product Details:
Grade | standardised |
Material | standardised |
Material Grade | standardised |
Size | standardised |
Standard | standardised |
Usage | Construction |
Single Piece Length | 6 meter, 3 meter |
Inconel 825 Bar offeredis available in ASME SB-425 standards and come with properties like superior resistance to pitting, crevice corrosion, inter-granular corrosion, and stress- corrosion cracking and other corrosive environments. These bars also come with superior mechanical properties from moderately to high temperatures as well as also have good weld-ability through all conventional processes. Further, these nickel-iron-chromium alloys also come with addition of molybdenum, copper and titanium with superior resistance to both general and localized corrosion under diverse conditions. We offer these at competitive prices.
Specifications:
Chemical Analysis:
C | MN | P |
| Si | Cr | Ni | Mo | Cu | Co | Cb Ta | Ti | Al | Fe | Other | Other |
.05 max | 1.0 max |
| .03 max | .5 max | 19.5 – 23.5 | 38.0 – 46.0 | 2.5 – 3.5 | 1.5 – 3.0 |
|
| 0.6 1.2 | 0.2 max | 22.0 min |
|
|
Product Details:
Material Grade | Standardised |
Grade | Standardised |
Material | Standardised |
Standard | Standardised |
Product Type | Standardised |
Density | Standardised |
Elongation | Standardised |
We are renowned in many small and large scale industries for providing high tensile strength & durable Inconel Pipes. These are used for Furnance components, muffles and for heat treating trays and baskets. We do complete quality checking of these Inconel Pipes at various levels of production as to ensure highly resistance against heat &corrosion, exact specification and high durability with robust performance.
Standards:
ASTM / ASME SB 163 / 167 / 517 / 704 / 705
Product Details:
Material Grade | Standardised |
Material | Standardised |
Grade | Standardised |
Standard | Standardised |
Product Type | Standardised |
Density | Standardised |
Inconel 625 ERW Pipe is a nonmagnetic, corrosion and oxidation resistant, nickel-base alloy. It has high strength and toughness in the temperature range cryogenic to 2000°F (1093°C) which is derived largely from the solid solution effects of the refractory metals, columbium and molybdenum, in a nickel-chromium matrix. Alloy 625 has excellent fatigue strength and stress- corrosion cracking resistance to chloride ions.
Range:
15 NB UP TO 300 NB IN SCH 5S , 10S , 10, 20 , 40S , 40 , STD, 80S, 80, XS, 100, 120, 160 & XXS
6.35 mm OD up to 100 mm OD in 0.6 TO 20 mm thickness.
Standards:
ASTM / ASME SB 163 / 167 / 517 / 704 / 705
Grades:
* ASTM / ASME UNS 6625 Inconel 625 Pipes
Product Details:
Material Grade | Standardised |
Material | Standardised |
Grade | Standardised |
Standard | Standardised |
Product Type | Standardised |
Density | Standardised |
Gunratna metal offer a wide range of inconel 625 seamless pipes made of qualitative raw material procured from reliable vendors. Known for its high quality, durability and high utility these inconel pipes are widely used in various industries across the globe.
Standards:
ASTM / ASME SB 163 / 167 / 517 / 704 / 705
Grades:
* ASTM / ASME UNS 6625 inconel 625 Pipes
Product Details:
Material Grade | Standardised |
Material | Standardised |
Grade | Standardised |
Standard | Standardised |
Product Type | Standardised |
Density | Standardised |
Inconel® 625 is a nonmagnetic, corrosion and oxidation resistant, nickel-base alloy. It has high strength and toughness in the temperature range cryogenic to 2000°F (1093°C), which is derived largely from the solid solution effects of the refractory metals, columbium and molybdenum in a nickel-chromium matrix. Alloy 625 has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions. Typical applications for Inconel® 625 have included heat shields, furnace hardware, gas turbine engine ducting, combustion liners and spray bars, chemical plant hardware and special seawater applications. Inconel® 625 sheet is available in thicknesses ranging from .010 to .156". Inconel® 625 strip in coil from is available in lighter gauges up 24" wide. Inconel® 625 plate is available up 4" thick.
Inconel® 625 bar is available in wrought bar up to 8" diameter and larger sizes and shapes may be forged to order. Inconel® 625 seamless pipe is available up to 8" NB. Larger sizes are available in welded construction (100% X-ray) and can also be fabricated to order. Inconel® 625 tubing (welded & seamless) is available up 3" OD to both aerospace (AMS 5581) and commercial (ASTM B444) specifications. Redrawn tubes and tubing with tight tolerances can be supplied in almost any size no matter how small the size or quantity. Butt-weld and forged fittings are available or can be manufactured with short lead times.
Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.
Specification:
Sheet/Plate | ASTM B443, AMS 5599, AMS 5869, ISO 6208, VdTüV 499, BS 3072NA21, EN 10095, DIN 17750 |
Round Bar/Wire | ASTM B446, AMS 5666, AMS 5837, ISO 9723, ISO 9724, ISO 9725, VdTüV 499, BS3076NA21, EN 10095, DIN 17752, DIN 17753, DIN 17754 |
Pipe & Tube | ASTM B444, ASTM B751, ASTM B829, ASTM B775, ASTM B705, ASTM B704, AMS 5581, ISO 6207, VdTüV 499, BS 3074NA21, DIN 17751 |
Fittings | ASTM B366 |
Forgings | ASTM B564, AMS 5666 |
Weld Wire | AWS A5.14 ERNiCrMo-3, AWS A5.11 ENiCrMo-3, DIN 1736 SG NiCr20Mo9Nb |
C | MN | P |
| Si | Cr | Ni | Mo | Cu | Co | Cb+Ta | Ti | Al | Fe | Nb |
.10 max | .50 max | .015 max | .015 max | .50 max | 20.0 -23.0 | 58.0 min | 8.0 - 10.0 |
| 1.0 max |
| 0.40 max | 0.40 max | 5.0 max | 3.15 - 4.15 |
Additional Information:
Product Details:
Steel Grade | standardised |
Shape | standardised |
Material Grade | standardised |
Grade | ASME SB-424 |
Standard | standardised |
Condition | New |
Product Details:
Thickness | standardised |
Material | standardised |
Shape | standardised |
Length | standardised |
Grade | B443 |
Color | standardised |
Condition | New |
Product Details:
Material Grade | Standardised |
Standard Type | Standardised |
Material | Standardised |
Size | Standardised |
Color | Standardised |
Density | Standardised |
Manufactured from quality raw material, these Inconel Sheets are known for its unique features such as tight tolerance, smooth surface and uniform.
Mechanical properties.
Standard ASTM / ASME SB 168, ASTM / ASME SB 424, ASTM / ASME SB 443.
Grades:
Product Details:
Material Grade | Standardised |
Material | Standardised |
Grade | Standardised |
Standard | Standardised |
Product Type | Standardised |
Density | Standardised |
Elongation | Standardised |
Shape | Standardised |
Gunratna Metal offer a wide range of Inconel Pipes made of qualitative raw material procured from reliable vendors. Known for its high quality, durability and high utility these inconel ERW pipes are widely used in various industries across the globe.
Standards:
ASTM / ASME SB 163 / 167 / 517 / 704 / 705
Grades:
* ASTM / ASME UNS 6600 INCONEL 600 Pipes
* ASTM / ASME UNS 6601 INCONEL 601 Pipes
* ASTM / ASME UNS 6625 INCONEL 625 Pipes
* ASTM / ASME UNS 7718 INCONEL 718 Pipes
* ASTM / ASME UNS 7751 INCONEL X-750 Pipes
* ASTM / ASME UNS 8800 INCONEL 800 Pipes
* ASTM / ASME UNS 8810/11 INCOLOY 800H Pipes
* ASTM / ASME UNS 8825 INCOLOY 825 Pipes
Range :
15 NB UP TO 400 NB.
Class:
SCH 5S , 10S , 10, 20 , 40S , 40 , STD , 60 , 80S , 80 and XS
Product Details:
Grade | Standardised |
Elbow Bend Angle | Standardised |
Brand | Standardised |
Thread Size | Standardised |
Working Temperature | Standardised |
Surface Treatment | Standardised |
Grade:
UNS N06600, N06601, N06625, N08800, N08810, N08825